carling technologies, inc. 60 johnson avenue, plainville, ct 06062 email: sales @ carlingtech.com application support: team2 @ carlingtech.com phone: 860.793.9281 fax: 860.793.9231 www.carlingtech.com tippette tippette full sized rocker switches the tippette series is a traditionally styled rocker switch, available in sealed or unsealed versions. these switches are appropriate for use in general purpose applications which may or may not require a modicum of environmental protection. the tippette series is available in both illuminated and non-illuminated versions and features a wide variety of circuits, actuator styles and bracket options. this versatile offering includes international agency certifcations and ratings to 26 amps for select circuits. product highlights: ? ratings up to 26 amps 250 vac ? illuminated or non-illuminated ? multiple termination, mounting and rocker options typical applications: ? general purpose applications ? commercial food equipment ? recreational vehicles
email: sales @ carlingtech.com application support: team2@carlingtech.com phone: (860) 793C9281 fax: (860) 793C9231 www.carlingtech.com 2 | tippette actuator styles & special circuits - general specifcations *manufacturer reserves the right to change product specification without prior notice. physical agency certifications mounting electrical mechanical contact rating 15 amps, 125 vac 10 amps, 250 vac 3/4 hp 125-250 vac 15 amps, 12-30 vdc life 25,000 cycles circuit dependent 50,000 cycles circuit dependent consult factory for applicable circuits. contacts fine silver, silver cad-oxide terminals brass or copper/silver plate 1/4 (6.3mm) quick connect terminations standard. solder lug - brass tin plated wire lead 16 gauge standard 105c 600vac screw terminals - brass endurance 100,000 cycles minimum lighted incandescent - rated 10,000 hours neon - rated 25,000 hours seals bracket - actuator wbl/mbl optional external gasket panel seal base phenolic (150c) rocker/bracket nylon 66 (105c) select circuits and constructions with vde/iec approvals are available. consult factory *angled corners are suggested for optimum fit. standard rectangular cutout is acceptable. .680 [17.27] 1.190 [30.22] 1.450 [36.83 ] 55? - 4 places .830 [21.08] mounting hol e (nylon snap-in brackets) panel thickness: .040 min. - .250 max.
email: sales @ carlingtech.com application support: team2@carlingtech.com phone: (860) 793C9281 fax: (860) 793C9231 www.carlingtech.com email: sales @ carlingtech.com application support: team2@carlingtech.com phone: (860) 793C9281 fax: (860) 793C9231 www.carlingtech.com | 3 tig/tih/tii & ltil/ltig-series rocker & paddle switches - ordering schemes 1 base part number 1 base part number 2 actuator style 2 actuator style 3 actuator color 3 actuator color 4 lens color 4 bracket 5 bracket 6 lamp voltage tiga51 ltila51 6m 6m bl bl rc mbl mbl 12v 1 base part number: series/poles / circuitry 8,11 / rating 7 / termination 10 10a 250vac, 15a 125vac, 3/4 hp 125-250vac, 15a 6-28vdc single pole in double pole base 2 double pole solder .250 screw wire solder .250 screw wire lug tab term. leads lug tab term. leads tiga50 tiga51 tiga54 tiga55 on-none-off tigk50 tigk51 tigk54 tigk55 tiga5a tiga5b tiga5e tiga5f (on)-none-off tigk5a tigk5b tigk5e tigk5f tiga5l tiga5m tiga5s tiga5t on-none-(off) tigk5l tigk5m tigk5s tigk5t tigb50 tigb51 tigb54 tigb55 on-none-on tigl50 tigl51 tigl54 tigl55 tigb5a tigb5b tigb5e tigb5f on-none-(on) tigl5a tigl5b tigl5e tigl5f tigc50 tigc51 tigc54 tigc55 on-off-on tigm50 tigm51 tigm54 tigm55 tigc5a tigc5b tigc5e tigc5f on-off-(on) tigm5a tigm5b tigm5e tigm5f tigc5l tigc5m tigc5s tigc5t (on)-off-(on) tigm5l tigm5m tigm5s tigm5t three pole four pole solder .250 screw wire solder .250 screw wire lug tab term. leads lug tab term. leads tihk50 tihk51 tihk54 tihk55 on-none-off tiik50 tiik51 tiik54 tiik55 tihk5a tihk5b tihk5e tihk5f (on)-none-off tiik5a tiik5b tiik5e tiik5f tihk5l tihk5m tihk5s tihk5t on-none-(off) tiik5l tiik5m tiik5s tiik5t tihl50 tihl51 tihl54 tihl55 on-none-on tiil50 tiil51 tiil54 tiil55 tihl5a tihl5b tihl5e tihl5f on-none-(on) tiil5a tiil5b tiil5e tiil5f tihm50 tihm51 tihm54 tihm55 on-off-on tiim50 tiim51 tiim54 tiim55 tihm5a tihm5b tihm5e tihm5f on-off-(on) tiim5a tiim5b tiim5e tiim5f tihm5l tihm5m tihm5s tihm5t (on)-off-(on) tiim5l tiim5m tiim5s tiim5t vde approved 10a 250vac, 15a 125vac, 12(6)a 250vac t85 single pole in double pole base 2 double pole solder .250 wire solder .250 wire lug tab lead lug tab lead tiga90 tiga91 tiga95 on-none-off tigk90 tigk91 tigk95 tigb90 tigb91 tigb95 on-none-on tigl90 tigl91 tigl95 tigc90 tigc91 tigc95 on-off-on tigm90 tigm91 tigm95 1 base part number: series / poles / illumination / circuitry 12 / rating 10 / termination 14 10a 250vac, 15a 125vac, 3/4 hp 125-250vac, 15a 15-28vdc illuminated single pole in double pole base illuminated double pole solder .250 screw wire solder .250 screw wire lug tab term. leads lug tab term leads ltila50 ltila51 ltila54 ltila55 on-none-off ltigk50 ltigk51 ltigk54 ltigk55 ltila5a ltila5b ltila5e ltila5f (on)-none-off ltigk5a ltigk5b ltigk5e ltigk5f ltila5l ltila5m ltila5s ltila5t on-none-(off) ltigk5l ltigk5m ltigk5s ltigk5t ltilb50 ltilb51 ltilb54 ltilb55 on-none-on ltigl50 ltigl51 ltigl54 ltigl55 ltilb5a ltilb5b ltilb5e ltilb5f on-none-(on) ltigl5a ltigl5b ltigl5e ltigl5f ltilc50 ltilc51 ltilc54 ltilc55 on-off-on ltigm50 ltigm51 ltigm54 ltigm55 ltilc5a ltilc5b ltilc5e ltilc5f on-off-(on) ltigm5a ltigm5b ltigm5e ltigm5f ltilc5l ltilc5m ltilc5s ltilc5t (on)-off-(on) ltigm5l ltigm5m ltigm5s ltigm5t 2 actuator style 1s angular/smooth face gloss 12 1c angular/cross serrations gloss 12 1f flatted/smooth face gloss 12 1l angular/longline serrations gloss 1,12 2l long smooth/narrow 14 6m curved/smooth face matte 3 6s curved/smooth face gloss 3 7s rounded paddle/smooth face gloss 1 7n witchs hat/narrow 14 7p witchs hat/wide 14 3 actuator color 9 bl black wh white rd red 3 actuator color 11 bl black wh white rd red 4 lens color 13 am amber rc red gn green 7 lu blue 7 cl clear wh white 2 actuator style 4 1s angular/smooth face gloss 1 1c angular/cross serrations gloss 1 1l angular/longline serrations gloss 1 6m curved/smooth face matte 3 6s curved/smooth face gloss 3 7s rounded paddle/smooth face gloss 2 5 bracket style 11 nbl nylon black wbl water shedding black 5 mbl marine style black 5,8 fn metal snap-in 4,6 fn blk black metal snap-in 4,6 fn ss stainless steel snap-in 4,6 6 lamp voltage neon 9 125n 125 volt 250n 250 volt incandescent 6v 6 volt 12v 12 volt 18v 18 volt 24v 24 volt 28v 28 volt 4 bracket style 9 a screw mount 5 b screw mount 5,12 c screw mount 5 h screw mount 5 nbl nylon black wbl water shedding black 4 mbl marine style black 4,6 fn metal snap-in 5 fn blk black metal snap-in 5 fn ss stainless steel snap-in 5 fw wide stainless steel snap-in 5 notes: 1 nbl, fn, & fw brackets only. 2 for single pole switch in a single pole base, specify til with single pole circuitry/rating/termination. 3 nbl, wbl, & mbl brackets only. with 6m actuator, brackets also will be matte fnish. 4 6m & 6s actuators only 5 not available with 6m & 6s actuators. 6 consists of wbl bracket, neoprene seal, and dummy rivets at open holes. consult factory for agency approval status. 7 all ratings are appropriate for usage in low voltage applications. 8 for additional special circuits, see catalog. 9 custom colors are available, consult factory. 10 .187 tab and pc terminations are also available. consult factory for catalog number callout. 11 ( ) momentary 12 not available with wbl or mbl style brackets. 13 available with bracket a, c or h only. 14 not available with mbl, wbl or h brackets. can be supplied as a double rocker to control separate poles of a tig,tih or tii switch. consult factory for details. notes: 1 nbl, fn, & fw brackets only. double pole circuits provided with 3 pole base. 2 ltil-series with nbl, fn, & fw brackets only. 3 nbl, wbl, & mbl brackets only. with 6m actuator, bracket will also be matte fnish. 4 1s, 1c, 1l & 7s with nbl bracket only available with ltil-series. 5 6m, 6s actuators only. 6 not available with 6m and 6s actuators. 7 not recommended with neon lamps. 8 consists of wbl bracket, neoprene seal, dummy rivets at open holes. consult factory for agency approval status. 9 not recommended with blue or green lenses. 10 all ratings are appropriate for usage in low voltage applications. 11 custom colors and additional bracket styles are available, cons ult factory. 12 ( ) - momentary 13 all double throw circuits supplied with two lenses. to specify two different lens colors, specify second color, after frst color. (ex. ltigm51-6s-bl-rc/gn-wbl-12v) 14 .187 tab and pc terminations are also available. consult factory for catalog number callout. additional ratings up to 20a 125-277vac, 1 1/2hp 125 vac, 2hp 250vac are available. consult factory for specifcs. additional ratings up to 12a 250vac, 17a 125 vac, 3/4 hp 125 vac, 1hp 250vac are available. consult factory for specifcs. three pole switch is also available: substitute h for fourth digit of part number . ex. ltihk51
email: sales @ carlingtech.com application support: team2@carlingtech.com phone: (860) 793C9281 fax: (860) 793C9231 www.carlingtech.com 4 | tippette actuator styles & special circuits - dimensional specifcations special circuits for tippette rocker switches circuit position 1 position 2 position 3 progressive two circuit gg both circuits on one circuit on off gg both circuits (on) one circuit on off single pole triple throw ge on on on two circuit gh circuit 1 on both circuits on circuit 2 on gp circuit 2 on circuit 1 on off reversing double pole double throw go on off on gx on none on ( ) indicates momentary function. .187[4.75] .187[4.75] .350[8.89] .187[4.74] .187 tab (q.c.) .141[3.58] .286[7.26] .370[9.39] .187[4.74] .250[6.35] .500[12.70] .250 tab (q.c.) solder lug #6-32nc-2 thread mounting hole (nylon snap-in brackets) panel thickness: .030 min. - .250 max. switch should be mounted at 90? for maximum water shedding (45? to 90? acceptable) .392[9.95] .830[21.08] 55? 1.450[36.83] 1.190[30.22] 4 plcs* .394[10.00] .055[1.40] dia .372[9.45] .125[3.18] dia .330[8.38] .075[1.91] dia .437[11.09] screw (assembled) printed circuit iec approved construction (tig only) 1.069[27.15] .650[16.51] .820[20.82] 1.069[27.15] wire lead * angled corners are suggested for optimum fit. standard rectangular cutout is acceptable. 6.000[152.40] terminal type .075[1.905] .490[22.86] .680[17.27] .650[16.51] .650[16.51] 1c til,tig,tih,tii 1.224[31.08] 2l til,tig,tih,tii .312[7.92] .957[24.30] 1.224[31.08] 7n tig 1l til,tig,tih,tii 1f tig, tii 7s tig .957[24.30] .300[7.62] 1.224[31.08] .650[16.51] .430[10.90] .880[22.40] .250[6.35] 1.224[31.08] .996[25.30] 1.035[26.28] .957[24.30] 1.024[26.00] .630[16.00] .880[22.4] .650[16.51] .957[24.30] .650[16.51] 7p tig 1s til,tig,tih,tii 6s tig 1.224[31.08] .957[24.30] 1.224[31.08] 1.224[31.08]
email: sales @ carlingtech.com application support: team2@carlingtech.com phone: (860) 793C9281 fax: (860) 793C9231 www.carlingtech.com email: sales @ carlingtech.com application support: team2@carlingtech.com phone: (860) 793C9281 fax: (860) 793C9231 www.carlingtech.com | 5 tippette mounting bracket styles - dimensional specifcations 1.625[41.27] a tih 55? .680[17.27] mounting hole (nylon snap-in brackets) panel thickness: .030 min. - .250 max. * angled corners are suggested for optimum fit. standard rectangular cutout is acceptable. 4 plcs* .426[10.82] c tig .426[10.82] .156[3.96] a til .156[3.96] a tig 1.625[41.27] a tii .070[1.77] 6-32nc-2 tap # .156[3.96] dia .156[3.96] dia 1.700[43.18] .960[24.38] .430[10.92] mbl, nbl, wbl tig black nylon, snap-in hole plug for til, tig, tih & tii .078[1.98] 1.625[41.27] 1.750[44.45] fw til, tig, tih, tii metal, snap-in 1.625[41.27] 1.940[49.27] 1.625[41.27] 2.090[53.08] 1.625[41.27] clearance hole standard with c bracket gcp gmp gloss finish matte finish .900[22.86] .437[11.09] cx til 1.126[28.60] h tig wide 1.625[41.27] 1.875[47.62] 1.570[39.87] narrow fn til, tig, tih, tii metal, snap-in .158[4.01] dia 1.940[49.27] 2.093[53.16] 1.625[41.27] 1.625[41.27] tapped hole standard with a & b brackets 1.350[34.29] 1.950[49.53] .960[24.38] .078[1.98] 1.940[49.27] .078[1.98] .078[1.98] 1.960[49.78] b til b tii, tig marine / std / watershedding 1.450[36.83] 1.892[48.06] 1.625[41.27] .830[21.08] 1.570[39.88] 1.700[43.18] 2.062[52.37] 1.190[30.22] c tih, tii til tig tii tih dimensional specifications: in. [mm]
email: sales @ carlingtech.com application support: team2@carlingtech.com phone: (860) 793C9281 fax: (860) 793C9231 www.carlingtech.com 6 | notes
email: sales @ carlingtech.com application support: team2@carlingtech.com phone: (860) 793C9281 fax: (860) 793C9231 www.carlingtech.com email: sales @ carlingtech.com application support: team2@carlingtech.com phone: (860) 793C9281 fax: (860) 793C9231 www.carlingtech.com | 7 sales representatives, distributors & company profle authorized sales representatives and distributors about carling founded in 1920, carling technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. with four iso registered manufacturing facilities and technical sales ofces worldwide, carling technologies sales, service and engineering teams do much more than manufacture electrical components, they engineer powerful solutionsf to learn more about carling please visit www.carlingtech.com/company-profle . to view all of carlings environmental, quality, health & safety certifcations please visit www.carlingtech.com/environmental-certifcations click on a region of the map below to fnd your local representatives and distributors or visit www.carlingtech.com/fndarep . europe middle east south america asia-pacific oceania africa mexico usa canada
worldwide headquarters carling technologies, inc. 60 johnson avenue, plainville, ct 06062 phone:f 860.793.9281 fax:f 860.793.9231 email: sales @ carlingtech.com northernfregionfsalesfofce:f nrsm @ carlingtech.com southeastfregionfsalesfofce: sersm @ carlingtech.com midwestfregionfsalesfofce: mrsm @ carlingtech.com westfregionfsalesfofce: wrsm @ carlingtech.com latinfamericafsalesfofce: larsm @ carlingtech.com asia-pacific headquarters carling technologies, asia-pacifc ltd., suite 1607, 16/f tower 2, the gateway, harbour city, 25 canton road, tsimshatsui, kowloon, hong kong phone:f int + 852-2737-2277 fax: int + 852-2736-9332 email: sales @ carlingtech.com.hk shenzhen,fchina:f shenzhen @ carlingtech.com shanghai,fchina:f shanghai @ carlingtech.com pune,findia: india @ carlingtech.com kaohsiung,ftaiwan:f taiwan @ carlingtech.com yokohama,fjapan: japan @ carlingtech.com europe | middle east | africa headquarters carling technologies ltd 4 airport business park, exeter airport, clyst honiton, exeter, devon, ex5 2ul, uk phone:f int + 44 1392.364422 fax:f int + 44 1392.364477 email:f ltd.sales @ carlingtech.com germany:f gmbh @ carlingtech.com france:f sas @ carlingtech.com www.carlingtech.com rev_11_2016
|
